tainless steel SAF and SDAF , ina SNV100-LPillow Blocks

corrosion proof flang bearing

Round Stainless steel Four-Bolt Heavy Duty Flange Bearing Unit

Oval stinless steel flange beating unit

Stainless steel ball bearings

Stainless steel bearing load capacity

Load directions for Extreme Bearings

Extreme Bearing units are intended for loads acting vertically towards the base plate support. Therefore, if the bearing housing is supported over its entire base, loads are limited only by the load limits of the bearing insert. If loads acting in other directions occur or if the housing is not supported over its entire base area, check that the magnitude of the load is permissible for the bolt assembly attached to the machine frame.

The load capability is limited by the bolt fastening
Loads acting vertically toward the base plate

Type EXF 4 bolt flange bearings

EXS pillow block bearings

Type EXW 2 bolt flange bearings

Type EXL 3 bolt flange bearings

Type EXT Take-up bearings

Type EXC Tapered pillow block bearings

Tensioner stud

The EXF bearing unit can be provided with a tensioner stud. In that case, the load can act in the opposite direction to the threaded rod. This is a unique feature of this type of Extreme Bearing.

This tensioner stud is designed to make it possible to create on a easy way a good working conveor tensioner

 

Self-aligning spherical roller bearing

Self-aligning spherical roller bearing inserts

Self-aligning spherical roller bearings have the advantage that they can carry a heavy radial and axial load.

stainles steel spherical roller bearing unit
  Basic Load Rating Limiting speed
Dimensions spherical roller bearing Dynamic Static Grease
Bearing No. d1 D B rsmin B1 d2 B2 B0 KN rpm
22205 K-CW33 + H305 20 52 18 1 29 38 8 4 43 45 7500
22206 K-CW33 + H306 25 62 20 1 31 45 8 4 59 62 6300
22207 K-CW33 + H307 30 72 23 1,1 35 52 9 4 81 88 5300
22208 K-CW33 + H308 35 80 23 1,1 36 58 10 6 88 100 4800
22209 K-CW33 + H309 40 85 23 1,1 39 65 11 6 95 105 4500
22210 K-CW33 + H310 45 90 23 1,1 42 70 12 6 100 120 4000
22211 K-CW33 + H311 50 100 25 1,5 45 75 12 6 120 140 3800
22212 K-CW33 + H312 55 110 28 1,5 47 80 13 6 145 175 3400
22213 K-CW33 + H313 60 120 31 1,5 50 85 14 6 180 220 3000
22215 K-CW33 + H315 65 130 31 1,5 55 98 15 6 190 250 2800
22216 K-CW33 + H316 70 140 33 2 59 105 17 6 210 275 2600
22217 K-CW33 + H317 75 150 36 2 63 110 18 8 250 325 2400
22218 K-CW33 + H318 80 160 40 2 65 120 18 9 305 410 2200
22219 K-CW33 + H319 85 170 43 2,1 68 125 19 9 340 450 2200
22220 K-CW33 + H320 90 180 46 2,1 71 130 20 8 375 500 2200
22222 K-CW33 + H322 100 200 53 2,1 77 130 21 8 405 575 1700

Download PDF or
Datasheet

Single row, Type-E roller bearing

Stainless steel Mcgill Sb22216W33s
Type E bearing seals, MCGILL
Stainless steel pillow block flange, Type E bearing seals

Type E bearing seals

An extra barrier to prevent contamination from entering the bearing

As standard, Type E bearings feature 2-RS bearing seals which differentiate this type from the unsealed Type T double row spherical roller bearings.
These Type E bearing seals and the lubricant are integrated into one system, so that the bearing can be kept sealed and greased for its lifetime without the need to refill.
The grease nipple on the bearing housing is intended to fill the rest of the Extreme Bearing housing with grease and so prevent water and contaminants from entering.

The Type E bearing seals are designed to provide an extra barrier to prevent
contamination from entering the bearing. In fact, an Extreme Bearing unit with a Type E insert offers superior triple protection from harsh environments and extreme conditions.

Stainless steel - E-type bearing unit

Triple barrier bearing labyrinth seal

The Type E bearing seals are designed to provide an extracontaminant barrier.

Firstly, the housing seal made of rubber attached to the shaft provides a primary barrier. It repels dirt and contaminants using the centrifugal force generated by the shaft. Secondly, the bearing housing is filled with grease to prevent contaminants from entering and damaging the bearing. Finally, there is a type of bearing seal called 2-RS to protect the bearing.

In fact, an Extreme Bearing unit with a Type E insert offers superior triple protection from harsh environments and extreme conditions.

Triple protection to shield the bearing

  1. Bearing housing seals
  2. Grease-filled housing
  3. Bearing insert seals
Dimensions
Basic Load Rating Limiting speed
Dynamic Static Grease
Bearing No. d1 D B rsmin B1 d2 B2 B0 Kn rpm
400105 K-CW33 + H205 20 52 18 1,0 26 38 8 3,7 40 40 6000
400106 K-CW33 + H206 25 62 20 1,0 28 45 8 3,7 50 55 5600
400107 K-CW33 + H207 30 72 23 1,1 32 52 9 3,7 68 78 5300
400108 K-CW33 + H208 35 80 23 1,1 33 58 10 5,5 77 88 5000
400109 K-CW33 + H209 40 85 23 1,1 34 65 11 5,5 80 95 4500
400110 K-CW33 + H210 45 90 23 1,1 35 70 12 5,5 83 102 4300
400111 K-CW33 + H211 50 100 25 1,5 37 75 12 5,5 102 125 3500
400112 K-CW33 + H212 55 110 28 1,5 41 80 13 5,5 100 120 3000
400113 K-CW33 + H213 60 120 31 1,5 45 85 14 5,5 150 190 2000
400115 K-CW33 + H215 65 130 31 1,5 46 98 15 5,5 160 200 1400
400116 K-CW33 + H216 70 140 33 2,0 50 105 17 5,5 170 220 1450
400117 K-CW33 + H217 75 150 36 2,0 54 110 18 8,3 250 325 1500
400118 K-CW33 + H218 80 160 40 2,0 58 120 18 8,8 210 7270 1600
400120 K-CW33 + H220 90 180 46 2,1 66 130 20 8,3 310 420 1300
400122 K-CW33 + H222 100 200 53 2,1 74 130 21 8,3 410 570 1000

Download PDF or
Datasheet