Single row deep-groove ball bearing insert with reversed set-screw access - same speed and load class as Type KV, with the locking feature on the opposite shaft side. Selected when surrounding equipment, guards, or the machine layout block tightening from the standard side, or when plant symmetry calls for matching units on both bearing positions.
Speed, radial load, and lubrication intervals match the standard ball-insert family; the reversed arrangement only changes installation access. (Internal code: Type KVA.)
The table lists each active catalogue SKU for this insert type with radial load, axial load, and maximum speed as defined for that exact unit (housing variant, seals, and size included). Use the search box to filter by SKU fragment, or open the product page for the full datasheet. You can also browse all options in the product configurator.
Interactive table: load and speed per SKU for insert type KVA (see live article page).
Mounting check Confirm tightening access on both shaft sides before specifying KV or KVA. Swapping the locking side after installation requires shaft demounting - choose the right variant up front to avoid field rework.
Our engineering team is available to assist with installation questions, troubleshooting, and custom application support.
Contact Technical Support