Insert de roulement type T – à rouleaux sphériques double rangée

Spherical roller bearing insert for heavy radial loads

Self-aligning double row spherical roller insert selected when the shaft bends, the frame flexes, or mounting tolerances stack up. The roller geometry compensates for angular misalignment while delivering high radial load capacity and tolerance for shock duty - typical for mixers, agitators, conveyors, and other heavy process equipment.

Mounted inside fully sealed AISI 316 stainless housings, the insert keeps performing in washdown, marine, chemically aggressive, and high-temperature environments where ball-insert solutions fall short. (Internal code: Type T.)

Typical applications and selection guidance

Choose this insert when:

• Shaft bending, frame flex, or alignment uncertainty on long spans
• High continuous radial load with intermittent shock or vibration
• Hygienic, marine, or chemically aggressive duty where stainless sealing is required
• Mixers, agitators, conveyors, dryers, and heavy process equipment

Consider an alternative when: speeds are very high and loads are light (a single row ball insert is more efficient), or when combined axial loads dominate (compare the tapered roller variants for adapter-sleeve mounting).

Pair this insert with the housing and seal package required by your contamination class; the configurator outputs the full SKU for housing, insert, seals, and shaft size.

Load and speed per SKU

The table lists each active catalogue SKU for this insert type with radial load, axial load, and maximum speed as defined for that exact unit (housing variant, seals, and size included). Use the search box to filter by SKU fragment, or open the product page for the full datasheet. You can also browse all options in the product configurator.

Interactive table: load and speed per SKU for insert type T (see live article page).

Engineering support Send your shaft drawing, target load, speed, and operating environment to our engineering team for a confirmed sizing.