tainless steel SAF and SDAF , ina SNV100-LPillow Blocks

corrosion proof flang bearing

Round Stainless steel Four-Bolt Heavy Duty Flange Bearing Unit

Oval stinless steel flange beating unit

Stainless steel ball bearings

EXL 3-bolt bracket flange bearing units

316 stainless steel 3-bolt bracket flange bearing

This 3-bolt chevron-shaped flange bearing is suitable for special configurations on conveyors.
The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to clean.
The units are delivered complete with a spherical roller bearing insert that enables the bearing block to carry up to five times more load than conventional bearings. Spherical roller bearings have the advantage that they provide a much larger load capacity than ball bearings and can accommodate axial force.
Many sealing options are possible. Each possesses different properties depending on the application. We would be pleased to advise you on the best choice of seal.

Oval stinless steel flange beating unit
Typ d B C T1 H1 H2 K J N L H Grease hole Basic load ratring
KN for spherical roller bearing
Basic load ratring
KN for double roll ball bearing
Axial movement Seal seat
Metric Imperial Dynamic Static Dynamic Static
EXL-028 28,57 1 1/8 26 48 60 12 52,4 31,8 47,6 11 84 130 M6 81 88 16 5,2 3,5 47×7
EXL-030 30 1 2/11
EXL-A30 30,16 1 3/16
EXL-032 31,75 1 1/4 28 50 60 12 60,3 31,8 50,8 12,5 93 146,6 M6 88 100 19 6,5 3,5 52×7
EXL-A35 34,9 1 3/8
EXL-035 35 1 17/45
EXL-037 36,51 1 7/16 28 51 62 12 60,3 41,3 50 12,5 98 158,6 M6 95 105 22 7,5 3,5 62×7
EXL-038 38,1 1 1/2
EXL-040 40 1 23/40
Footnotes: T¹ The dimension T gets a maximum 6 millimetres wider when the bearing unit is assembled with centrifugal seals.

Load directions for ExtremeBearing units

Extreme Bearing units are intended for loads acting vertically towards the base plate support. Therefore, if the flange bearing units is supported over its entire base, loads are limited only by the load limits of the bearing insert. If loads acting in other directions occur or if the housing is not supported over its entire base area, check that the magnitude of the load is permissible for the bolt assembly attached to the machine frame..

Type EXL 3 bolt flange bearings