Four Hole Flanged Stainless Housing

EXF – 4 hole flanged

EXF is the four-hole flanged stainless housing in the Extreme Bearing system. The foot pattern bolts to a flat machine face, giving a rigid interface for shafts that run parallel to the mounting plate—common on gearmotor adapters, conveyor frames, and tank agitator mounts.

Like all Extreme Bearing housings, EXF is built for aggressive environments with AISI 316 construction and integrated sealing options.

EXF four hole flanged stainless bearing housing

View the EXF unit in 3D

Combine EXF with the insert letter (T, TC, TV, P, V, KV, KVA, KU, KUA, etc.) and seal codes required by your contamination and temperature class. The configurator outputs the full SKU including shaft diameter.

View the EXF unit in 3D

Loading 3D model…

Rotate, zoom and measure the stainless steel 316 EXF four-hole flanged unit. Use the toolbar to take measurements.

Dimensions per size

EXF dimension drawing
EXF – dimension sketch (J and H1)

J is the bolt hole pitch circle diameter (mm) — the distance between opposing bolt centres, used when laying out the four mounting holes on the machine face.

Loading dimension data…

Engineering support
Contact our technical team for application-specific guidance.

NEED TECHNICAL SUPPORT?

Our engineering team is available to assist with installation questions, troubleshooting, and custom application support.

Contact Technical Support