SS 316 4-bolt flange bearingsSEAWATER RESISTANT WITH A DOUBLE ROW OF ROLLERS AND A SPECIAL LABYRINTH SEAL
4-bolt square flange bearing
Stainless steel flange bearings from Extreme Bearing are waterproof. and delivered with a self-set double-row ball or roller bearing of choice. The Extreme Bearing bearing fitted with a double-row roller bearing makes that the bearing block can carry 5 times more load than competitive bearings. Easy replaceable the usual Y-Bearing unit for a EXS Unit, because the important dimensions of these four-hole flange bearing units correspond to the lighter bearing blocks UCFL, SY, MSF, FPL , FNL 522A, FNL 522B.
Labyrinth seals – suitable for the hardest possible conditions
Standard are the bearing units sealed by a Labyrinth seals. Therefore these seals make that Extreme Bearing stainless steel flange bearing blocks are ideal for use in places where a lot of moisture, sand and water. Such as in vegetable- and potato washing machines. Housing made of stainless steel 316. With Self-Aligning roller bearing units to handle high radial and thrust loads, corrosion free. Particularly suitable in harsh conditions and wet environment. Resistant to all cleaning products, and chemicals, unique products which are very easy to clean. Rounded corner and smooth surfaces and even at the backside.
- T¹ The dimension T gets a maximum 6 millimeters wider when the bearing unit is assembled with centrifugal seals.
- * Bearing units with type number marked with (*) are not in stock, please ask for delivering time.
Load directions for Extreme Bearings
Extreme Bearing units are intended for loads acting vertically toward the base plate support. Therefore, if the SS bearing housing is supported over its entire base, loads are limited only by the load limits of the bearinginsert. If loads acting in other directions occur or if the housing is not supported over its entire base area, check that the magnitude of the load is permissible for the bolt assembly joining the machine frame
Type EXF 4 bolt flange bearings
By type EXS and EXL is a tensioner-stud provide. The loadacting can by these SS bearingunits also in opposite direction of the threaded rod. By these
EXV Trust Bearings
Tis is a variant of the EXS type only for axial loads